If you want a decent attic and haven’t yet found a house that has a suitable one, it can be a little disheartening. When you come across a property that you love that’s lacking in the upstairs department, it might be worth constructing one yourself or even renovating the space that’s already there. You should consider getting the advice of a home inspector Nashville since they can check the home to see what would be viable.
Building an attic may seem like a lot of work, money and hassle for those who aren’t too knowledgeable on what the process involves, but as a home inspector Nashville knows it can actually be a great investment; especially if the building doesn’t already have the additional room. Whether it’s increasing the property’s value or just making your house more of a home, you’re sure to find that it’s well worth it.
A Home Inspector Nashville discusses some of things you may want to consider with an attic, and many of which a Home Inspector Nashville should be looking for during your Home Inspection.
What do you need to keep in mind when building an attic?
If you do decide to construct an attic or renovate an existing one, there are quite a few things that you may want to consider. A home inspector Nashville can give more details on these important aspects. Whatever your reason may be, it can be important to carefully think about factors like:
1. Properly insulating your home attic
Insulation is important in any part of your home – and if you’re planning on building a new room or tackling a renovation project, it’s something that you should really consider. Understanding how to properly insulate your new attic is essential; from the types of insulation, to its proper installation.
First of all, did you know that there are several benefits that can come with insulating your attic? A home inspector Nashville has seen in some instances, it may not seem necessary or it could sound like a waste of time and money, but if you factor in the costs that can come with heating during the colder seasons, it can be crucial to ensure that no warmth can escape the property. A home inspector Nashville can conduct a full inspection of the insulation to ensure that you can reap the full benefits.
To help you out, here are the main two types of insulation that you could choose:
● Loose fill, which is best suited to attics with irregular joist spacing, lots of obstructions and filling in gaps of old insulation
● Batts, which are best suited to standard joist spacing, fewer obstructions and attics with enough headroom for movement during installation
A home inspector Nashville will be able to advise on which type of insulation would be suitable for your home and requirements.
Once you’ve decided which type will be ideal for your needs, you can go ahead with the process of preparing and installing.
● Seal and fix any leaks (for example roof, water, or air leaks)
● Direct all exhaust fans and vents to the exterior
● Box out light fixtures
● Protect yourself during the installation (wear a dust mask, gloves, etc. and be careful during the insulation process)
● Make sure that you preserve the attic’s airflow
● Use the right vapour barrier (if you’re insulating from scratch)
● Protect access spots
2. The importance of ensuring that it has appropriate ventilation
Roof and attic ventilation can be just as important as insulation, and some might agree that it is even more so. Generally, it can help provide decent airflow, lower cooling bills, extend the life of shingles and more – and to top it all off, it can be fairly easy to install roof and soffit vents. A home inspector Nashville can perform a full check for ventilation and advise on a solution that works for your home.
How do I install an attic roof vent?
In most cases, adding attic vents is as simple as marking the spot for the vents, cutting the holes and putting the vents in. Here’s a quick step by step tutorial of the process:
- Mark the spot where you’ll be installing the vents
- Cut the shingles for the vent (it’s often best to make the cut out area half an inch larger than the vent opening), then cut a hole in the roof sheathing
- Slide the vent into place and nail the lower edge
- To properly install it, it’s often best to use roof cement to connect the spot where the shingles and vent meet
When marking the spots, choose carefully – a home inspector Nashville knows you don’t want to place a vent over a rafter, so it’s often best to mark them from inside the attic. In general, it’s best to put them on the same side of the roof, in an area where they’ll be less prominent and noticeable. Also, when considering spacing and placement, be sure to mark them out evenly.
It’s also worth noting that it’s generally a good idea to remove any obstructions that occur after you’ve cut out the hole, before you place and install the vent.
How do I install a soffit vent?
Soffit vents are installed into the underside of your home’s eaves, like the base of your roof (which are called soffits). In many instances, these can be easier to install – all you really need to do is:
● Cut out the vent holes (it’s generally a good idea to make the hole dimensions 1 inch smaller than the vents)
● Screw the soffit vents into place
● Staple baffles into the spaces between the rafters
If your attic is properly insulated, the baffles will be essential to the amount of ventilation that your home will have. A home inspector Nashville can provide advice on this. The baffles are vital to the soffit vents, as these can allow airflow through the vents and into the room past the insulation.
3. Choosing the right truss
There are a number of different types of roof trusses out there, and if you’re going to need to do any renovation or remodeling work on your new roof and want something structurally sound, there’s likely to be one or two types that will suit your needs.
When it comes to deciding between engineered trusses or those built on-site, it’s generally a better idea to go with the former. In most cases, this ensures better quality and safety for your construction project and home overall. A home inspector Nashville can help you decide which truss would work best for your requirements.
What types of truss should I consider?
There are a wide variety of options out there, but we’d suggest that you take a look at trusses like:
● Scissor roof truss
● Howe truss
● Fink (and double fink) truss
● Attic truss
● Hip truss
● Raised heel truss
● North light truss
● King post truss
● Queen post truss
● Flat truss
What are some of the main components of a roof truss?
There are a wide variety of things that may be needed in order to properly assemble a roof truss. From the standard construction tools themselves, to the little bits and pieces that make the truss more stable and secure; it’s always worthwhile to take the time to ensure that you have everything that’s needed. Here are some of the main components, as well as a quick description of what they are:
● Wall plate (bearing) – As the base, this is generally the first thing that needs to be placed. It’s always horizontal, and it’s usually put at the top of the external walls
● Tye beam – Also known as the “bottom chord”, this is typically placed after the wall plate and used for the placement of the ceiling
● Rafter – Often called the “top chord”, this is generally placed at a slant from one edge of the wall plate to the other, generally connected by a butt cut or to a stub post
● Webs – Beams that connect the top and bottom chords, typically placed in a triangular pattern
● Battens – In general, one of the last things you’ll place are the battens (also known as purlins). These are typically placed horizontally across the rafter
While there are some other things to consider, like the types of joints to use and if there’s an overhang, these 5 things are needed in most roof trusses.
4. Ridge board or ridge beam?
A home inspector Nashville states another important aspect to think about if you’re planning on remodeling the roof of your soon-to-be home is if a ridge board or ridge beam will be best for your needs. Both are located at the ridge, but it’s important to keep in mind that they serve different purposes and are each more suitable for some situations and not quite as useful in others. A home inspector can provide more details on ridge boards and beams.
Ridge boards – A non-structural component, ridge boards typically serve as a prop for the rafters to connect to and rest against. In most cases, they’re only suitable for roofs with slopes from 3/12 up to 12/12.
Ridge beams – Ridge beams on the other hand are a key structural component that supports the ends of the rafters at the ridge. If the roof slope is less than 3/12, it’s generally a wise idea to go with a ridge beam.
While these are only short descriptions of the two options available, it should be enough to give you an idea of what they are, their function and which type will be most suitable for your needs. A home inspector will be able to help you make the best decision.
Plan your attic construction project carefully
With all this information, there’s a good chance that you’ll be far better equipped to take on an attic or roof construction project if you need to when buying your new house. It is important to utilize a home inspector who will be able to consider all of the relevant details. There may be other factors that you’ll need to bear in mind both before and during these types of renovations, but in terms of construction and structural safety, these are some of the key points to go over. A home inspector Nashville can help you plan in the best way.
Whether it’s a small or large remodel, it’s vital to have all the knowledge you need to make the best decisions possible from start to finish. Get in touch with That One Inspector to make a more information decision.